Proportional seam tracking SENSORTRACK
It is particularly designed for MIG/MAG or
Submerged Arc processes. Its modularity allows single or
two-directional sensing without any travel limitation.
Functioning : The correction speed is proportional to the deformation
of the sensing probe.
Processes
: MIG/MAG, Submerged Arc
Motorised axes : 1 or 2 (unlimited travel)
Maximum travel speed in sensing mode :
80 cm/mn
Sensing precision : + or - 0.2 mm
Ignoring of tacking : option
Minimum plate thickness : 5 mm
Optical seam tracking LASERTRACK
It can solve numerous application cases using
submerged arc, MIG/MAG, TIG or Plasma. The laser head is not in
contact with the workpiece and allows to meet numerous requirements
which cannot be met with a traditional seam tracking device.
- Workpieces with joint without sufficient
mechanical reference (butt or fillet weld of small thicknesses)
- Seam tracking precision thanks to the
correction of the torch impact point
- Efficient treatment of tacks
- Adaptability and fast operation without
decalibration on odd shaped joints.
- No mechanical wear or accidental
deterioration, the system functioning without any contact with the
workpiece.
Processes:
MIG/MAG, Submerged Arc, TIG, Plasma
Motorised axes : 1 or 2 (travel 200 mm)
Maximum travel speed in sensing mode :
200 cm/mn
Sensing precision : 0.1 mm
Ignoring of tacking : yes
Minimum plate thickness : 0.1 mm
