|
Metals to weld
|
Applications
|
Wire
|
|
Non alloyed steels (mild steels to C-Mn steels)
A 33 to A 52 - E 24 to E 36
|
Welding
|
|
|
Electro-galvanised thin steel sheets
|
|
|
Low alloy steels with high yield strength
|
E >= 500 MPa
|
|
|
E >= 620 MPa
|
|
|
E >= 690 MPa
|
|
|
High alloy steels (stainless)
|
MIG-TIG-PLASMA welding of 18.8 type steels
|
|
|
Difficult to weld steels, hard surfacing, welding dissimilar
steels
|
|
|
MIG-TIG-PLASMA welding of 18.8.3 type steels
|
|
|
Dissimilar welding of 24.12 type steels
|
|
|
Welding of 25.20 refractory steels resistant to oxydation up
to 1200 degrees C.
|
|
|
Hard surfacing 13% Cr stainless steel
|
|
|
Duplex steels
|
Welding Duplex steels
|
|
|
Nickel based
(Inconel)
|
Welding 9% Ni and inconels, dissimilar welding of stainless
steels onto carbon steels, good corrosion resistance at high
temperature.
|
|
Welding inconel 600, 601, 625 - Incoloy 800, 800 H, 801 ...
Assembly resistant to marine corrosion and high temperature
(1000 °C)
Use at low temperature (- 196°C)
|
|
|
Light Alloys
|
Welding aluminium
|
|
|
Braze welding light alloys type AS 4G, AS 7G
|
|
|
Welding alloys type AG3
|
|
|
Welding alloys type AG3 - AG4
|
|
|
Welding alloys type AG4 - AG5
|
|
|
Copper Alloys
|
Welding oxygen-free copper
Braze welding thin steel plates
|
|
|
Welding copper aluminium alloys
Braze welding galvanized plates
Hard surfacing resistant to corrosion with good coefficient of
friction
|
|
|
Similar to NERTALIC 46 but with higher hardness and resistance
to wear.
|
|
