Search  
 



Contact us

Non or low-alloyed steels 

Cored wires with slag
• Particularly easy to use
• High deposition rate especially 
  for vertical up welds
• Good bead appearance
• Ideal for penetration 
  onto ceramic backing bars
• Gases: ATAL 5A (Ar/CO² - 80/20) ou CO²		 • Existe aussi un produit à faible émission 
  de fumées (réduction de 50 % des fumées –
  réduction de l’émission de CO avec mélange
  gazeux Ar/CO² voir suppression de l’émission
  de CO avec mélange gazeux Ar/O² - 
  ARCAL 22).
Special features
CVN as welded

Downhand welding
All position welding
Special
use

SD 105 A : special primed plate 
to be used with Ar/CO².
SD 105 Primer : special primed plate 
to be used with CO².
SD 100 : excellent compromise between downhand, vertical up (with or without weaving) and vertical down welding.
SD 127 : compared to SD 100, high deposition rate, excellent fillet weld bead profile, downhand welding pnly.
SD 100 Plus : compared to SD 100, 
better CVN at - 40 °C.
SD GREEN 101 : same caracteristics 
than SD 100 with reduction of fumes.
Particularly well adapted to welding in confined places where fume extraction is difficult (shipyards, pressure vessel).
SD 100 Ni : compared to SD 100, better CVN at - 50 °C.
SD 128 : 
for steels with Re > 500 MPa.
SD 128 Sr : same as SD 128 
for  thermic treatment applications 
(Sr : Stress Relieved).
SD 155 : 
for steels with Re > 550 MPa.
SD 162 : 
for steels with Re > 620 MPa.
SD 170 :  
for steels with Re > 690 MPa.
0° C

SD 105 Primer
-

-
-20° C
-
-40° C
-
-
-50° C
-

SD 128 Sr
(heat treatment)


Cored wires
  non or low-alloyed
steels
with slag
  metal cored
  basic
  self shielded
  Stainless steels
austenitic
  Duplex
  ferrite
  Hard surfacing
metal cored,
  self shielded
  Standards AWS, EN
  Approvals ABS, BV, CL, DB, DNV, FI, GL, LRS, SV, TÜV